Joyharbour microbubbles machine, using the world's leading micro-bubble generator patented technology, by changing the physical properties of water, in the air under particular pressure in the full integration of 21% oxygen and water to form a liter of water, a little more than 5 million in the pores 5 -20 times the micro-nano bubbles, the bubbles small and dense, in the light refraction will appear milky.
- Deep cleansing function
- Deep Cleansing
- Assisted absorption of skin care products
- Cell repair
- Care not to hurt the skin
1.When the machine casing with dirt, use warm water cloth, wring gently wipe the dirty parts.
NOTE: Panel display portion has electrical components and circuit boards, must not be flooded.
2.Joyrharbour instrument 50 hours or face a month later, the neutral detergent into the water, so that the machine automatically cleaning cycle for 5-10 minutes.
3.When the product is not used for a long time, the remaining water in the system should be drained to prevent the breeding of bacteria. Cut off the power, try a dry place for storage.
4.Best life span of five years, proper proper maintenance can prolong life.
5.Please regular cleaning, to ensure that tap water contaminants are effectively removed.
1.The machine should be used in a clean environment, do not use at high or low temperature environments.
2.When the water temperature is above 46 degrees, the machine will alarm; higher than 50 degrees, the machine automatically shut down (hint: the machine stops running after 1-2 minutes, the machine is self-draining state, then do not cut off the power when the machine is completely stopped after the operation, the power indicator lights, unplug the power only), please adjust the water temperature before using the machine to prevent damage due to high water temperature and internal parts of the machine, make sure that the service life of the machine.
3.Before using the machine, you should install the access to water and other parts of the last installed power adapter powered operation of the machine.
4.Before the machine need to first use the power adapter DC output DC input connector plug and body are connected, and then plug the power supply is.
5.Do not suddenly turn off the power when the machine is working, you should first stop the run and then unplug the power cord.
6.When the machine stops running, you should unplug the power, then dismantle access to water and other equipment. Never in the case of power, demolition access to water and other accessories.
7.Never place heavy objects on the machine, causing the machine damage.
8.Machine in operation must remain upright, not horizontally.
9.When transporting the machine also needs to keep an upright position.
10.Never rinse directly on the wound, it is desirable cleansing wipes or cotton dipped slightly microbubble water to graze wound, can accelerate wound healing.